|
|
 2/27/05 - Here's the resin body I started with. Note that unlike the donor kit, the doors are not separate pieces. |
 3/18/05 - I had to modify the kit door panels so that the interior tub would fit into the resin body. I cut the door panels away from the outer frame. |
 3/18/05 - Here the door panels have been cemented to the tub. |
 3/19/05 - Here's the completed chassis from the AMT/Ertl '57 Fairlane 500 kit. |
 3/19/05 - Another shot of the finished chassis. |
 3/19/05 - Here's the primed body test fit to the chassis. |
 3/19/05 - Starting to mask off the body for the two-tone paint job. |
 3/19/05 - I use masking tape to cover large areas and then fill in the smaller areas with liquid masking. |
 3/19/05 - I also use the liquid masking to seal the edges of the masking tape. |
 3/19/05 - Here's the white part of the paint job. |
 3/19/05 - Masked again for the second color application. |
 3/21/05 - And the finished paint job... |
 3/23/05 - Another test fit, this time with the partially finished interior. |
 3/28/05 - The finished interior... |
 4/18/05 - Foil detailing has been added. Almost finished... |
|